18 Endicott Street, North
P.O. Box 5400
Weirs Beach, N.H. 03247-5400
(603) 366-4811 ext. 100
sales@thurstonsmarina.com
"At the Bridge" Route 3, Weirs Beach, N.H.
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
EASY TO OWN AND OPERATE ~ Evinrude E-TEC outboards require no scheduled dealer maintenance - that's right, zero - for the first three years or 300 hours of normal recreational use. Not even gearcase lube. You'll never have to change the oil or the oil filter, which can cost several hundred dollars each year for other technologies.
Evinrude E-TEC uses up to 75% less oil than typical 2-stroke carbureted engines and up to 50% less oil than competitive direct injection engines (when run with Evinrude/Johnson XD 100T oil with optional dealer programming of the Engine Management Module, versus normal TCW3 oil). And you'll use 30% less oil compared to a 4-stroke with a typical maintenance schedule under normal operation conditions.
That's just the start. The Evinrude E-TEC engines use an exclusive low friction design. There are no belts, no chains, no powerhead gears, no cams, and no mechanized oil pumps.
Evinrude E-TEC uses up to 75% less oil than typical 2-stroke carbureted engines and up to 50% less oil than competitive direct injection engines (when run with Evinrude/Johnson XD 100T oil with optional dealer programming of the Engine Management Module, versus normal TCW3 oil). And you'll use 30% less oil compared to a 4-stroke with a typical maintenance schedule under normal operation conditions.
That's just the start. The Evinrude E-TEC engines use an exclusive low friction design. There are no belts, no chains, no powerhead gears, no cams, and no mechanized oil pumps.
 |
 |
 |
  |
Evinrude Motors
J.D. Powers and Associates
ranks Evinrude highest in customer satisfaction with
direct injected two-stroke outboard engines
in the U.S. for 2009 |
P.O. Box 5400 | Weirs Beach, New Hampshire | 03247-5400 | (603) 366-4811
Copyright© 2010
July 16, 2010 11:36 PM